Training courses


Date Course Location
December 2018
17-19 Introduction : gPROMS FormulatedProducts Daejeon, Korea
20 gCRYSTAL: An Introduction Yokohama, Japan
January 2019
21-23 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
24-25 Advanced: Custom Modelling and Model Publishing (2-day) Daejeon, Korea
24 gPROMS® ProcessBuilder: Introduction (AM) Yokohama, Japan
24 gPROMS® ProcessBuilder: Hands-on training (PM) Yokohama, Japan
25 gPROMS® Custom Modeling: Advanced (1day) Yokohama, Japan
February 2019
11-13 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
14-15 Advanced: FBCR and CSTR Design by gPROMS-CFD coupling (2-day) Daejeon, Korea
18 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation London, UK
19 gPROMS ProcessBuilder: Dynamic flowsheet modelling and optimisation London, UK
20-21 gPROMS: Developing custom unit operation models London, UK
21 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
21 gCRYSTAL: Hands-on training (PM) Yokohama, Japan
22 gPROMS: Deploying models for use across the organization London, UK
22 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
22 gSOLIDS: Hands-on training (PM) Yokohama, Japan
March 2019
04-05 gPROMS: Developing custom unit operation models New Jersey, USA
06 gPROMS: Defining and solving optimisation problems New Jersey, USA
07 gPROMS: Deploying models for use across the organization New Jersey, USA
08 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation New Jersey, USA
18-19 Introduction: gPROMS® FormulatedProducts (2-day) Daejeon, Korea
28 gPROMS® ProcessBuilder: Introduction (AM) Yokohama, Japan
28 gPROMS® ProcessBuilder: Hands-on training (PM) Yokohama, Japan
29 gPROMS® Custom Modeling: Advanced (1day) Yokohama, Japan
April 2019
08-09 gPROMS: Developing custom unit operation models Houston, USA
08-10 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
10 gPROMS: Model Validation Houston, USA
11 gPROMS: Defining and solving optimisation problems Houston, USA
11-12 Advanced: Custom Modelling and Model Publishing (2-day) Daejeon, Korea
12 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation Houston, USA
18 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
18 gCRYSTAL: Hands-on training (PM) Yokohama, Japan
19 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
19 gSOLIDS: Hands-on training (PM) Yokohama, Japan
29 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation London, UK
30 gPROMS ProcessBuilder: Dynamic flowsheet modelling and optimisation London, UK
May 2019
01-02 gPROMS: Developing custom unit operation models London, UK
03 gPROMS: Deploying models for use across the organization London, UK
13-14 gPROMS: Developing custom unit operation models New Jersey, USA
15 gPROMS: Defining and solving optimisation problems New Jersey, USA
16 gPROMS: Deploying models for use across the organization New Jersey, USA
17 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation New Jersey, USA
20-22 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
23-24 Advanced: Power Plant and CCS Applications (2-day) Daejeon, Korea
23 gPROMS® ProcessBuilder: Introduction (AM) Yokohama, Japan
23 gPROMS® ProcessBuilder: Hands-on training (PM) Yokohama, Japan
24 gPROMS® Custom Modeling: Advanced (1day) Yokohama, Japan
June 2019
17-18 Introduction: gPROMS® FormulatedProducts (2-day) Daejeon, Korea
20 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
20 gCRYSTAL: Hands-on training (PM) Yokohama, Japan
21 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
21 gSOLIDS: Hands-on training (PM) Yokohama, Japan
24 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation London, UK
25 gPROMS ProcessBuilder: Dynamic flowsheet modelling and optimisation London, UK
26-27 gPROMS: Developing custom unit operation models London, UK
28 gPROMS: Deploying models for use across the organization London, UK
July 2019
08-09 gPROMS: Developing custom unit operation models Houston, USA
10 gPROMS: Model Validation Houston, USA
11 gPROMS: Defining and solving optimisation problems Houston, USA
12 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation Houston, USA
15-17 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
18-19 Advanced: Custom Modelling and Model Publishing (2-day) Daejeon, Korea
25 gPROMS® ProcessBuilder: Introduction (AM) Yokohama, Japan
25 gPROMS® ProcessBuilder: Hands-on training (PM) Yokohama, Japan
26 gPROMS® Custom Modeling: Advanced (1day) Yokohama, Japan
August 2019
19-20 gPROMS: Developing custom unit operation models New Jersey, USA
21 gPROMS: Defining and solving optimisation problems New Jersey, USA
22 gPROMS: Deploying models for use across the organization New Jersey, USA
22 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
22 gCRYSTAL: Hands-on training (PM) Yokohama, Japan
23 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
23 gSOLIDS: Hands-on training (PM) Yokohama, Japan
23 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation New Jersey, USA
26-28 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
29-30 Advanced: FBCR and CSTR Design by gPROMS-CFD coupling (2-day) Daejeon, Korea
September 2019
16-17 Introduction: gPROMS® FormulatedProducts (2-day) Daejeon, Korea
16-17 gPROMS: Developing custom unit operation models Houston, USA
16 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation London, UK
17 gPROMS ProcessBuilder: Dynamic flowsheet modelling and optimisation London, UK
18 gPROMS: Model Validation Houston, USA
18-19 gPROMS: Developing custom unit operation models London, UK
19 gPROMS: Defining and solving optimisation problems Houston, USA
19 gPROMS® ProcessBuilder: Introduction (AM) Yokohama, Japan
19 gPROMS® ProcessBuilder: Hands-on training (PM) Yokohama, Japan
20 gPROMS® Custom Modeling: Advanced (1day) Yokohama, Japan
20 gPROMS: Deploying models for use across the organization London, UK
20 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation Houston, USA
October 2019
14-16 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
17-18 Advanced: Custom Modelling and Model Publishing (2-day) Daejeon, Korea
17 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
17 gCRYSTAL: Hands-on training (PM) Yokohama, Japan
18 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
18 gSOLIDS: Hands-on training (PM) Yokohama, Japan
November 2019
11-12 gPROMS: Developing custom unit operation models New Jersey, USA
13 gPROMS: Defining and solving optimisation problems New Jersey, USA
14 gPROMS: Deploying models for use across the organization New Jersey, USA
15 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation New Jersey, USA
18-20 Introduction: gPROMS® ProcessBuilder (3-day) Daejeon, Korea
21-22 Advanced: Power Plant and CCS Applications (2-day) Daejeon, Korea
25 gPROMS ProcessBuilder: Steady-state flowsheet modelling and optimisation London, UK
26 gPROMS ProcessBuilder: Dynamic flowsheet modelling and optimisation London, UK
27-28 gPROMS: Developing custom unit operation models London, UK
28 gPROMS® ProcessBuilder: Introduction (AM) Yokohama, Japan
28 gPROMS® ProcessBuilder: Hands-on training (PM) Yokohama, Japan
29 gPROMS® Custom Modeling: Advanced (1day) Yokohama, Japan
29 gPROMS: Deploying models for use across the organization London, UK
December 2019
16-17 Introduction: gPROMS® FormulatedProducts (2-day) Daejeon, Korea
19 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
19 gCRYSTAL: Hands-on training (PM) Yokohama, Japan
20 gPROMS® FormulatedProducts Introduction (AM) Yokohama, Japan
20 gSOLIDS: Hands-on training (PM) Yokohama, Japan

Our website uses cookies so that we can provide a better browsing experience. Continue to use the site as normal if you're happy with this or find out more about cookies

OK