안녕하십니까 ? PSE Korea 입니다 .

Opening Ceremony 이후 저희 PSE Korea 에 많은 관심을 가져주셔서 감사합니다 .

◈ 일시 : 2008.07.09 ( 수 ) ~ 2008.07.11 ( 금 ) 3 일간

◈ 장소 : KAIST 기계공학과 전산실 ( 대전 )

◈ 인원 : 약 15 명 – 신청인원이 많을 시 기존 사용자 우선 , 조직별 안배 고려예정

◈ 등록비 : 학생 : 100,000 원 / 일반인 : 200,000 원 ( 현금결재만 가능 , 세금계산서 발행 )

우리은행 : 1006-401-277385 , 예금주 : 피에스이코리아 ( 유 )

아래는 대략적인 과정 소개 입니다..

Note that session timings are approximate.

09:00 – 09:30	Registration and coffee
09:30 – 10:45	Overview of advanced process modelling in gPROMS and typical applications
10:45 – 11:15	Refreshments
11:15 – 12:30	Session 1 An overview of gPROMS ModelBuilder Flowsheeting in gPROMS and the Process Model Libraries (PML) General features of the gPROMS modelling environment Hands on session: running gPROMS for the first time
12:30 – 13:30	Lunch
13:30 – 15:30	Session 2 Development of lumped models An introduction to the gPROMS modelling language
15:30 – 16:00	Refreshments
16:00 – 17:30	Session 2 Development of lumped models (continued) Hands-on session: modeling and simulation of a cooled CSTR reactor

09:30 – 11:00	Session 3 Development of distributed models Hands-on session: modelling and simulation of a tubular reactor
11:00 – 11:30	Refreshments
11:30 – 12:30	Session 4 Development of model libraries Introduction Defining a model’s public interface Hands-on session: developing a cooled CSTR reactor library model and using it within a reaction process flowsheet
12:30 – 13:30	Lunch
13:30 – 15:30	Session 5 Dynamic optimisation An introduction to the mathematics of dynamic optimisation Specifying and solving dynamic optimisation problems in gPROMS Hands-on session: deriving an optimal strategy for operation of a semi-batch reactor
15:30 – 16:00	Refreshments
16:00 – 17:30	Session 6 Advanced optimisation Some advanced features related to dynamic optimisation: optimising initial conditions and variable bounds Hands-on session: further batch reactor optimisation

09:30 – 11:00	Session 7 Parameter estimation The maximum likelihood formulation for parameter estimation Specifying and solving parameter estimation problems
11:00 – 11:30	Refreshments
11:30 – 12:30	Session 7 Parameter estimation (continued) Hands-on session: estimating the parameters of a kinetic reaction scheme
12:30 – 13:30	Lunch
13:30 – 14:30	Session 8 Experiment design Model-based experiment design Specifying and solving experiment design problems Demo session: designing experiments for a fed-batch fermentation
14:30 – 16:30	Discussion and individual tuition as requested

참석을 희망하시는 분들께서는 아래의 정보를 회신하여 주시면 감사하겠습니다 .

관련한 문의 사항은 전화 ( 고윤정 : 070-7577-0888) 또는 email (info-kr@psenterprise.com) 을 이용해 언제든지 연락 주시면 성심껏 답변 드리도록 하겠습니다.

감사합니다 .